Engine Installation - TGB BLADE 250 Service Manual

5. ENGINE REMOVAL
Loosen speedometer cable mounting nut, and
then remove the cable.
Remove 3 bolts and remove drive chain protector.
Turn the socket bolt clockwise, and then remove
speedometer gear box.
Caution
The socket bolt is provided with left turn
thread.
Remove 2 bolts, and then remove the drive
sprocket fixing plate, drive chain and drive
sprocket.
Remove the rear side engine hanger mounting
nuts and bolts.
Remove the front side engine hanger mounting
nut and bolt
Remove left side engine hanger, and then remove
engine by left side.

Engine Installation

Check if the bush of engine hanger parts for
damage.
Install engine in the reverse procedures of
removal.
Caution
● Pay attention of foot & hand safety as engine
installation to avoid hurting.
● Do not bend or twist wires.
● Cables wires have to be routed in accordance
with normal layout.
Engine hanger Bolt:
Torque value: 7.5~9.5kgf-m
5-6
Speedometer cable
Socket bolt
2 bolts
2 nuts
1 nut
3 bolts