Configuring Dynamic Host Name Mapping - H3C S3610-28P Operation Manual

Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
To do...
Configure the SPF
calculation intervals
Specify the SPF
calculation duration

4.5.7 Configuring Dynamic Host Name Mapping

Follow these steps to configure the dynamic host name mapping:
Enter system view
Enter IS-IS view
Assign a local host
name
Assign a remote host
name and create a
mapping between the
host name and a
system ID
Return to system view
Enter interface view
Assign a DIS name for
the local network
Use the command...
timer spf maximum-interval
[ minimum-interval
[ incremental-interval ] ]
spf-slice-size duration-time
To do...
system-view
isis [ process-id ]
[ vpn-instance
vpn-instance-name ]
is-name sys-name
is-name map sys-id
map-sys-name
quit
interface interface-type
interface-number
isis dis-name symbolic-name
Use the command...
4-31
Chapter 4 IS-IS Configuration
Remarks
Optional
The default SPF
calculation interval is 10
seconds.
Optional
10 milliseconds by default
Remarks
––
––
Required
No name is assigned
by default.
This command also
enables the mapping
between the local
system ID and host
name
Optional
One system ID only
maps to one name.
No name is assigned
by default
––
––
Optional
Not assigned by
default
This command is only
applicable on the
router with dynamic
host name mapping
enabled.
It is invalid on
point-to-point links.