Figure 4.44 L2 Switching > Spanning Tree > Stp Port Advanced Settings; Figure 4.45 L2 Switching > Spanning Tree > Mst Config Identification - Advantech EKI-9226G Series User Manual

4.5.10.4 STP Port Advanced Settings
The STP Port Advanced Settings page allows you to select the port list to apply this
setting.
To access this page, click L2 Switching > Spanning Tree > STP Port Advanced
Settings.
Figure 4.44 L2 Switching > Spanning Tree > STP Port Advanced Settings
The following table describes the items in the previous figure.
Item
Port Select
Priority
Apply
The ensuing table for STP Port Status settings are informational only: Port, Identifier
(Priority / Port Id), Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost,
Designated Bridge, Edge Port Conf/Oper, P2P MAC Conf/Oper, Port Role and Port
State.
4.5.10.5 MST Config Identification
The MST Config Identification page allows you to configure the identification setting
name and the identification range.
To access this page, click L2 Switching > Spanning Tree > MST Config Identifica-
tion.
Figure 4.45 L2 Switching > Spanning Tree > MST Config Identification
The following table describes the items in the previous figure.
Item
Configuration Name Enter the identifier used to identify the configuration currently being
Revision Level
Apply
The ensuing table for MST Configuration Identification Information settings are
informational only: Configuration Name and Revision Level.
Description
Select the port to designate the STP settings.
Click the drop-down menu to designate a priority.
Click Apply to save the values and update the screen.
Description
used. It may be up to 32 characters.
Enter the identifier for the Revision Configuration, range: 0 to 65535
(default: 0).
Click Apply to save the values and update the screen.
62 EKI-9226G Series User Manual