Table of Contents
Advertisement
Item
Clock Frequency
The following table describes the items in the PTP External Clock Configuration
page.
Item
Delete
Clock Instance
HW Domain
Device Type
Profile
Add New PTP Clock Click Add New PTP Clock to create a new clock instance.
Save
Reset
4.4
Monitor
4.4.1
Ports
4.4.1.1
Traffic Overview
This page provides an overview of general traffic statistics for all switch ports.
1.
Navigate to Monitor > Ports and click Traffic Overview.
The Port Statistics Overview page displays.
The following table describes the items in the Port Statistics Overview page.
Item
Port
Packets
Bytes
Errors
Description
Enter a string to indicate the Clock Frequency.
The possible range of values are 1 - 25000000 (1 - 25MHz).
Description
Check this box and click on Save to delete the clock instance.
Indicates the instance number of a particular Clock Instance [0..3].
Click on the Clock Instance number to edit the Clock details.
Indicates the HW clock domain used by the clock.
Indicates the Type of the Clock Instance. There are five Device Types.
1. Ord-Bound - clock's Device Type is Ordinary-Boundary Clock.
2. P2p Transp - clock's Device Type is Peer to Peer Transparent
Clock.
3. E2e Transp - clock's Device Type is End to End Transparent Clock.
4. Master Only - clock's Device Type is Master Only.
5. Slave Only - clock's Device Type is Slave Only.
Indicates the profile used by the clock.
Click Save to save changes.
Click Reset to reset the the page immediately.
Figure 4.40 Port Statistics Overview
Description
Displays the logical port for the entry.
Displays the number of received and transmitted packets per port.
Displays the number of received and transmitted bytes per port.
Displays the number of frames received in error and the number of
incomplete transmissions per port.
66
EKI-8500 Series User Manual
Advertisement
Table of Contents
