Figure 4.34 L2 Switching > Multicast > Igmp Snooping > Igmp Settings - Advantech EKI-9226G Series User Manual

The ensuing table for Properties Information settings are informational only:
Unknown Multicast Action.
4.5.8.2 IGMP Snooping
IGMP Snooping is defined as the process of listening to Internet Group Management
Protocol (IGMP) network traffic. IGMP Snooping allows a network switch to listen in
on the IGMP conversation between hosts and routers and maintain a map of which
links need which IP multicast streams. Multicasts can be filtered from the links which
do not need them in turn controlling which ports receive specific multicast traffic.
IGMP Settings
To access this page, click L2 Switching > Multicast > IGMP Snooping > IGMP Set-
tings.
Figure 4.34 L2 Switching > Multicast > IGMP Snooping > IGMP Settings
The following table describes the items in the previous figure.
Item
IGMP Snooping
State
IGMP Snooping Ver-
sion
IGMP Snooping
Report Suppression
Apply
The ensuing table for IGMP Snooping Information settings are informational only:
IGMP Snooping State, IGMP Snooping Version and IGMP Snooping V2 Report Sup-
pression.
The ensuing table for IGMP Snooping Table settings are informational only: Entry
No., VLAN ID, IGMP Snooping Operation State, Router Ports Auto Learn, Query
Robustness, Query Interval (sec.), Query Max Response Interval (sec.), Last Mem-
ber Query count, Last Member Query Interval (sec), Immediate Leave and Edit (click
to modify the settings).
Description
Select Enable or Disable to designate the IGMP Snooping State.
Select designate the IGMP Snooping Version: V2 or V3.
Select Enable or Disable to setup the report suppression for IGMP
Snooping.
Click Apply to save the values and update the screen.
54 EKI-9226G Series User Manual