4.1 Discovering Switches
4.1.1 First Time Installation
Enabling ProView Function
See "Enabling ProView Function" on page 22 for further information.
Configuring Network Settings
EKI Device Configuration Utility provides two ways to configure network settings:
DHCP + Auto IP Settings or Static Settings.
DHCP + Auto IP Settings
1.
Select Ethernet under the desired device.
2.
Click the drop-down menu to select DHCP + Auto-IP.
3.
Click Apply to confirm the settings.
Static Settings
1.
Select Ethernet under the desired device.
2.
Click the drop-down menu to select Static IP.
3.
Enter the IP Address, Subnet Mask and Gateway.
Figure 4.1 Selecting Networking Setting
32
EKI-5729PI & EKI-5624PI User Manual