Figure 4.23 Dscp Based Qos Ingress Classification - Advantech EKI-8500 Series User Manual

The DSCP based QoS Ingress Classification page displays.
The following table describes the items in the previous figure.
Item
DSCP
Trust
CoS
DPL
Save
Reset
4.3.4.9 DSCP Translation
This function allows you to configure the basic QoS DSCP Translation settings for all
switches. DSCP translation can be done in Ingress or Egress.
Navigate to Configuration > QoS and click DSCP Translation.
1.
EKI-8500 Series User Manual

Figure 4.23 DSCP based QoS Ingress Classification

Description
Displays the maximum number of supported DSCP (64).
Click to enable or disable (default) trust classification. Only frames
with trusted DSCP values are mapped to a specific CoS and DPL.
Frames with untrusted DSCP values are treated as a non-IP frame.
Click the drop-down menu to set the CoS value (values: 0 to 7).
Click the drop-down menu to set the Drop Precedence Level (values:
0 to 3).
Click Save to save changes.
Click Reset to undo any changes made locally and revert to
previously saved values.
51