Sony MVS-8000X User Manual page 1289

Icon Title Message
Create [Create Key Frame] cannot be
Key Frame executed.
There is no free Key Frame.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is not
active. (UserX)
Deactivate The license will be deactivated
License after rebooting your system.
Disk Success!!
Format
Failure.
Make sure of the memory card.
Error This operation is cancelled,
because the register is locked.
Please change the register
status to be unlocked first.
The file was not able to be
read.
It was not possible to make a
file.
Failed...
The Source and the target are
the same directory.
Please change the source or
the target directory.
Description
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] for a UserX region
with insufficient usable keyframes.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a register for
which the appropriate region selection button in
the numeric keypad control block is not
selected. Try again after you select the region
selection button [UserX] in the numeric keypad
control block.
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, the Deactivate License
procedure completed successfully.
7317: Engineering Setup >System
>Maintenance
In the above menu, removable disk formatting
procedure completed successfully.
7317: Engineering Setup >System
>Maintenance
In the above menu, removable disk formatting
procedure failed. Check that the memory card
is correctly inserted.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store/Recall >Edit
In the above menu, an attempt was made to
assign to a register that is locked. Unlock the
register before carrying out the assignment.
7142.1: File >Shotbox, Macro >File Edit
In the above menu, [Off Line Edit] was pressed
but the selected file could not be read.
Select the file again, and press [Off Line Edit]
once more.
7142.3: File >Shotbox, Macro >File Edit >Off
Line Edit
In the above menu, when storing, the file could
not be written.
Try the store once more.
7162: File >All, External File >Import/Export
In the above menu, importing a file failed.
Check the format of the original file, and try
again.
7172: File >Configure >Unit ID Copy
In the above menu, the same directory and ID
were selected for source and target.
Select a different directory and ID.
1289
Error Messages