Defining A Plot Function; Choosing Display Elements; Selecting Auto-Feed - Agilent Technologies 8719ES User Manual

Defining a Plot Function

1. Press
DEFINE PLOT
Copy

Choosing Display Elements

• Choose which of the following measurement display elements that you want to appear
on your plot:
Choose PLOT DATA ON
plot.
Choose PLOT MEM ON
plot.
Choose PLOT GRAT ON
on your plot.
Choose PLOT TEXT ON
(This does not include the marker values or softkey labels.)
Choose PLOT MKR ON
appear on your plot.
Figure 4-5 Plot Components Available through Definition

Selecting Auto-Feed

• Press AUTO-FEED
Choose AUTO-FEED ON
compatible printer after each time you press
Choose AUTO-FEED OFF
.
if you want the measurement data trace to appear on your
if you want the displayed memory trace to appear on your
if you want the graticule and the reference line to appear
if you want all of the displayed text to appear on your plot.
if you want the displayed markers, and marker values, to
until the correct choice is highlighted.
if you want a "page eject" sent to the plotter or HPGL
if you want multiple plots on the same sheet of paper.
Printing, Plotting, and Saving Measurement Results
Defining a Plot Function
PLOT .
4- 15