Time; Date; Schedule Holiday Option; User Group Holiday Setting - Bosch ICP-SOL4-P Installation Manual

Solution 4000 control panel
Default: No
Selections:
Yes. The user can edit the time of this Sked from the codepad or Date entry.
–
–
No. The user cannot edit the time of this Sked from the codepad, and it does not appear in
the displays. And the Date entry in A-Link Plus is grayed out.
Select whether the user can edit the time of this Sked from the codepad or A-Link Plus.
25.1.5

Time

Default: Disable
Selections: Disable, HH:MM (hours and minutes)
Enter the time that the Sked executes using a 24-hour clock (for example, 2:45 PM is
entered as 14:45).
No schedule function displays "..." as grayed out.
Follow these steps to program a time:
1.
2.
3.
4.
25.1.6

Date

Default: Disable
Selections: Disable, Day/Month
Enter the date that the Sked executes.
25.1.7

Schedule Holiday option

Default: Disable
Selections:
–
–
–
If no Days of the Week are programmed, this Sked operates only on the Holidays
programmed in the Holiday setting used with this Sked. This Sked also operates if the
Holiday falls on a day of the week that is programmed
25.2

User group Holiday setting

25.2.1

User group

Use the parameter to select users for the group 1 - 8.
Selections: Up to 64 users can be set for each user group.
In the Schedules -> Schedule settings -> Function, Select Active user (group) for Output
settings. The user credentials (passcode, access card, and RF keyfob) for the users assigned
to the user group are enabled for the Output settings.
Bosch Security Systems B.V.
With the codepad, it appears in the Date Format [MMDD] display under the Schedule
menu.
With the A-Link Plus, the Date entry becomes editable.
Double-click on the field corresponding to the Sked you wish to program the time for.
Select one function except the No Schedule function. The time field will become active.
Click inside the time field and either use the up and down arrows to set the time, or
type in the desired time.
Click on OK.
Ignore holiday setting, Holidays identified in the specific Holiday setting is not effective.
Holiday will do the schedule, it is to allow Sked operates on Holidays programmed in
the Holiday setting.
Holidays are exception day, it is to prevent this Sked from operating on the Holidays
identified in the specific Holiday setting.
Installation manual
Schedules | en 189
2024-07 | V01 | F.01U.418.606