Rf Devices; Programming Tools; System Batteries; Standby Battery - Bosch DS7200V2-UK Installer's Manual

6.3

RF Devices

• RF3227E RF Receiver: Supervises the use of
wireless devices. Up to 2 allowed per system.
• RF3332E RF Keyfob: 2-button keyfob that can
arm/disarm the system and send a Panic code to
the Security Company if programmed.
• RF3334E RF Keyfob: 4-button keyfob that can
arm/disarm the system and send a Panic code to
the Security Company if programmed. It can also
control other devices.
• RF3401E Point Transmitter: Point transmitter that
features a supervised sensor loop and a magnetic
reed switch. External magnet assembly allows for
quick and easy installation on doors and windows.
• RF3405E Inertia Transmitter: Magnetic and dry
contact wireless transmitter with a built-in inertia
sensor used for monitoring doors, windows, or other
dry contact devices.
• RF3503E Two-Button Transmitter: Magnetic and
dry contact wireless transmitter with a built-in inertia
sensor. Used for monitoring doors, windows, or
other dry contact devices.
• RF1100E Glassbreak Detector: Wireless
transmitter used for detecting breaking glass.
• RF280ETHS Wireless Smoke Detector: Wireless
photoelectric smoke detector with built-in 135°F
(57°C) heat sensor and 85 dB sounder.
• RF835E Wireless TriTech PRI/Microwave
Detector: Wireless detector that utilizes passive
infrared (PIR) technology, microwave (MW)
technology, and artificial intelligence to detect
motion.
• RF940E Wireless PIR Detector: High performance
PIR motion sensor.
6.4

Programming Tools

• DS7447E/DS7447V2 Text Keypad: Required for
keypad programming.
• PK32 Programming Key: Copy system
programming entries to key for quick delivery to
another system. Can also be used as a backup disk.
• Remote Programming Software (RPS): Remote
programming and account management utility.
7.0

System Batteries

7.1

Standby Battery

• 12 V, 7 Ah sealed lead-acid rechargeable battery
• Power Sonic: PS-1270
• YUASA: NP7-12
7.2

RAM Backup Battery

• 3 V coin-type lithium battery (Panasonic CR2032 or
equivalent)
Page 10 P/N: 4998152533-02
PART I: INTRODUCTION
Copyright  2007 Bosch Security Systems, Inc.
8.0

Available Power

8.1

Auxiliary Power

Use auxiliary power terminals to power devices
requiring continuous power. Up to 1.2 A is available
for continuously powered devices.
8.2

Alarm Power

The Alarm Power (ALRM +) terminal provides positive
12 VDC for Programmable Output 2 (PO 2) when it is
configured as a siren driver, and PO 1 when it is
configured as the alarm output. Up to 1.85 A of alarm
power is available.
9.0

Installer Keypad Connector

Use the Aux/Data connector to connect an Installer
Keypad or a DX4010i/DX4010 to the control panel for
programming and diagnostics.
DS7200V2-UK Installer's Guide