Table of Contents
Advertisement
show ip prefix-list
This command displays the contents of IPv4 prefix lists.
Syntax
show ip prefix-list [detail [prefix-list-name] | summary [prefix-list-name] |
prefix-list-name [network mask [longer] [first-match] | seq sequence-
number ]] [detail | summary] prefix-list-name [network network-mask ]
[seq sequence-number] [longer] [first-match]
detail | summary—(Optional) Displays detailed or summarized
•
information about all prefix lists.
•
prefix-list-name—(Optional) The name of a specific prefix list.
•
network—(Optional) The network number
•
mask—Required if a network is specified. The network mask dotted-quad
notation. In dotted-quad notation, the 1 bits must be contiguous and left
justified.
•
seq sequence-number—(Optional) Applies the sequence number to the
prefix list entry. The sequence number of the prefix list entry.
longer—(Optional) Displays all entries of a prefix list that are more
•
specific than the given network/length.
•
first-match—(Optional) Displays the entry of a prefix list that matches
the given network.
Default Configuration
No prefix lists are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
User Guidelines
The following combinations of parameters are acceptable:
show ip prefix-list prefix-list-name network /length first-match
show ip prefix-list prefix-list-name network /length longer
show ip prefix-list prefix-list-name network /length
Layer 3 Routing Commands
1401
Advertisement
Table of Contents
