Table of Contents
Advertisement
Chapter 2 Useful Features
1.2.6
Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
(a)
Save Changes and Exit
The SETUP utility closes with all the changes saved in NVRAM (Non-volatile memory). After the SETUP utility
closes, the system automatically reboots.
(b)
Discard Changes and Exit
The SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility is
retained.
After the SETUP utility closes, the system automatically reboots.
(c)
Save Changes and Power Off
The SETUP utility closes with all the changes saved in NVRAM.
After the SETUP utility closes, the power of the server is automatically turned off.
(d)
Discard Changes and Power Off
The SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility is
retained.
After the SETUP utility closes, the power of the server is automatically turned off.
(e)
Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
• The factory-set value may differ from the default value depending on your server
Note
model. Reconfigure each item according to your environment by referring to the
list of settings in this section.
• The values of iSCSI Configuration submenu and UEFI Driver Configuration
submenu do not return to the default value.
Express5800/R120f-1E Maintenance Guide
1. System BIOS
97
Advertisement
Table of Contents
