System Data Save; Cleaning And Visual Check; Cleaning; Visual Check - NEC NEAX2000 IVS2 Installation Manual

CHAPTER 2 INSTALLATION

System Data Save

SYSTEM DATA SAVE
After system data entry, save the system data to floppy diskette. Refer to "MATWorX Users
Guide" for the operation of system data save.

CLEANING AND VISUAL CHECK

Cleaning

Clean the following places:
• Inside of the main equipment, especially the bottom of the base.
• On the Top Cover.
• Around the Main Equipment and the MDF.
• Keyboard on the Attendant Console.

Visual Check

(1) Check to see if all circuit cards are in their positions correctly.
(2) Check that the cable connections in the PIM are correctly and completely connected, and
the routing of the cables has been done smoothly and neatly.
(3) Check to see if the MAT is removed.
Page 222
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 3.0