Internal Paging Group Assignment - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to
Internal Paging Groups (i.e., Page Zones). The setting in this program also
determines if the Internal Page Group can receive Internal All Call Paging. The
system can have up to 64 paging groups. An extension can be in only one Internal
Paging Group.
Input Data
Item
No.
Conditions
None
Feature Cross Reference
Programming Manual

31-02 : Internal Paging Group Assignment

Extension Number
Item
01
Internal Paging Group Number
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The system
allows up to 64 Internal Paging Groups. An
extension can be in only one Internal
Paging Group.
02
Internal All Call Paging Receiving
Allow or prevent All Call Internal Paging for
each extension. If allowed, extension can
place and receive All Call Internal Paging
announcements. If prevented, extensions
can only make (not receive) All Call
Internal Paging announcements. If
combined, Paging zones should be
restricted as well, change the internal page
zone group in Program 31-07-01 to 0.
Paging, Internal
Program 31 : Paging Setup
Input Data
0~64
(0 = No Setting)
0 = Off
1 = On
Issue 1.0
Maximum 8 digits
Default
0 for IP Station
1 for TDM Station
0
2 - 375