Internal Paging Group Assignment - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to
Internal Paging Groups (i.e., Page Zones). The setting in this program also
determines if the Internal Page Group can receive Internal All Call Paging. The
system can have up to 64 paging groups. An extension can be in only one Internal
Paging Group.
Input Data
Item
No.
01
02
Feature Cross Reference

Programming Manual

31-02 : Internal Paging Group Assignment

Extension Number
Item
Internal Paging Group Number
Assign extensions to Internal Paging Groups
(i.e., Page Zones). The system allows up to
64 Internal Paging Groups. An extension
can be in only one Internal Paging Group.
Internal All Call Paging Receiving
Allow or prevent All Call Internal Paging for
each extension. If allowed, extension can
place and receive All Call Internal Paging
announcements. If prevented, extensions
can only make (not receive) All Call Internal
Paging announcements. If combined,
Paging zones should be restricted as well,
change the internal page zone group in
Program 31-07-01 to 0.
Conditions
None
Paging, Internal
Program 31 : Paging Setup
Input Data
0~64
(0 = No Setting)
0 = Off
1 = On
Issue 10.1
Maximum 8 digits
Default
All stations: 0 (OT)
All stations: 1 (AU)
0 (OT)
1 (AU)
2 - 437