Spanning-Tree Mst Configuration; Spanning-Tree Mst Cost - Edge-Core ES4626 User Manual

7.3.15 spanning-tree mst configuration

Command: spanning-tree mst configuration
no spanning-tree mst configuration
Function: Enter the MSTP mode. Under the MSTP mode, the MSTP attributes can be
set. The command "no spanning-tree mst configuration" restores the attributes of the
MSTP to their default values.
Command mode: Global Mode
Default: The default values of the attributes of the MSTP region are listed as below:
Attribute of MSTP
Instance
Name
Revision
Usage Guide: Whether the switch is in the MSTP region mode or not, users can enter
the MSTP mode, configure the attributes, and save the configuration. When the switch is
running in the MSTP mode, the system will generate the MST configuration identifier
according to the MSTP configuration. Only the switches with the same MST configuration
identifier are considered as in the same MSTP region.
Example: Enter MSTP region mode.
Switch(Config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#

7.3.16 spanning-tree mst cost

Command: spanning-tree mst <instance-id> cost <cost>
no spanning-tree mst <instance-id> cost
Function: Sets path cost of the current port in the specified instance; The command "no
spanning-tree mst <instance-id> cost" restores the default setting.
Parameter: <instance-id> sets the instance ID. The valid range is from 0 to 48. <cost>
sets path cost. The valid range is from 1 to 200,000,000.
Command mode: Interface Mode
Default: By default, the port cost is relevant to the port bandwidth.
Port Type
10Mbps
100Mbps
1Gbps
10Gbps
Default Value
There is only the instance 0. All the VLANs (1~4094) are
mapped to the instance 0.
MAC address of the bridge
0
Default Path Cost
2000000
200000
20000
2000
236
Suggested Range
2000000~20000000
200000~2000000
20000~200000
2000~20000