| Basic Management Tasks
C
4
HAPTER
Displaying CPU Utilization
D
CPU U
ISPLAYING
authentication by a single global password as configured for the password
command, or by passwords set up for specific user-name accounts. The
default is for local passwords configured on the switch.
W
I
EB
NTERFACE
To configure parameters for the console port:
Click System, then Telnet.
1.
Specify the connection parameters as required.
2.
Click Apply
3.
Figure 22: Telnet Connection Settings
TILIZATION
Use the System > CPU Utilization page to display information on CPU
utilization.
CLI R
EFERENCES
◆
"show process cpu" on page 709
P
ARAMETERS
The following parameters are displayed:
Time Interval – The interval at which to update the displayed
◆
utilization rate. (Options: 1, 5, 10, 30, 60 seconds; Default: 1 second)
CPU Utilization – CPU utilization over specified interval.
◆
– 144 –