Table of Contents
Advertisement
2
Step: Create a New Configuration
nd
Choose which connectivtiy option is used and need to be configurated.
3
rd
Step: Connectivity Configuration
Here it is possible to configure the connectivity settings according to the end device selected previously.
For example, if you selected "Gateway" you can choose HID or CDC mode. It is also possible to adjust the maximum
number of HandScanners that can connect to the Gateway (multipairing - up to 5 devices).
If you selected "Insight Mobile", you can choose the type of Integration Path (Software Keyboard, Intent, SDK).
Choose the preferred settings.
Information on the different connectivity options can be found at https://www.datalogic.com/handscanner/developer.
4
th
Step: Device Settings
The Device Settings can be used to optimize the HandScanner for certain use cases.
The Engine Settings allow to improve the readability of barcodes:
y activate Fuzzy 1D processing for hard to read 1D barcodes
y activate Display mode for barcodes on screens or foils
y activate Picklist mode to enable a more accurate aiming with the scanning field
The Feedback profiles allow to customize the HandScanners feedback.
The Sleep Mode determines the duration of inactivity after which the HandScanner turns off.
5
Step: Symbology Settings
th
The Symbology Settings can be used to switch the barcode types (including inverse barcodes) on or off and to set bar-
code lengths, edge tolerances as well as check digits.
y Switch off unused barcode types.
y Switch on inverse barcode types if needed.
6
Step: Workflow Rules
th
The Workflow Rules can be used to manipulate the barcode data. These can be used to change barcode data through
rules with conditions and actions. These are then in an IF-THEN relationship with each other, which means that:
IF a condition is true, THEN an action is executed.
An action is also carried out without a condition.
Application example:
Insert the prefix "Datalogic" for the following barcode:
Condition: Barcode matches "Glove"
Action: Add prefix "Datalogic"
Outcome: "DatalogicGlove"
Create the condition "Barcode Matches: Gloves" and the action "Add Prefix Datalogic."
1. Set condition (IF)
7
Step: Configure Devices and Gateway Firmware Update
th
For the configuration of the device:
y Click on Save. Assign a name and download the configuration file. Then follow the procedure below to apply the
configuration with Insight Mobile or the Gateway.
For a firmware update:
y To upgrade the HandScanner firmware, download the latest version of Insight Mobile App from
logic.com/handscanner/config, "Download" section. The App will upgrade the firmware of the paired HandScanner
if an update is available.
y To upgrade the Gateway, download the latest Gateway firmware version at
ner/config, "Downloads" section. Then follow the procedure below for the Gateway.
To configure Insight Mobile:
Copy the downloaded configuration file in the following folder on your mobile device:
(/sdcard)/Android/data/de.proglove.connect/files
RESULT
The configuration file will be deployed automatically on the mobile phone.
18
2. Set action (THEN)
https://www.data-
https://www.datalogic.com/handscan-
Advertisement
Table of Contents
