Display System Stable State - HPE D6020 Maintenance And Service Manual

Field
Start time
Last execution
time
Last completion
time
Execution counts
Job name
Last execution
status

display system stable state

Use display system stable state to display system stability and status information.
Syntax
display system stable state
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# (Centralized devices in standalone mode.) Display system stability and status information.
<Sysname> display system stable state
System state
Role
Active
# (Distributed devices in standalone mode.) Display system stability and status information.
<Sysname> display system stable state
System state
Redundancy state: Not ready
Slot CPU
0 0
* 1 0
# (Centralized devices in IRF mode.) Display system stability and status information.
Description
Time to execute the schedule for the first time. If no execution time is specified, this
field is not displayed.
Last time when the schedule was executed. If no execution time is specified, this field
is not displayed. If the schedule has never been executed, "Yet to be executed" is
displayed for this field.
Last time when the schedule was completed. If no execution time is specified, this field
is not displayed.
Number of times the schedule has been executed. If the schedule has never been
executed, this field is not displayed.
Name of a job under the schedule.
Result of the most recent execution:
•
Successful.
•
Failed.
•
Waiting—The device is executing the schedule and the job is waiting to be
executed.
•
In process—The job is being executed.
•
-NA-—The execution time has not arrived yet.
To view information about whether the commands in the job has been executed and
the execution results, execute the display scheduler logfile command.
: Stable
State
Stable
: Not ready
Role State
Active Stable
Standby Service starting
315