Rmdir; Shutdown - HPE D6020 Maintenance And Service Manual

* Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<Sysname.59>

rmdir

Use rmdir to delete an existing directory.
Syntax
rmdir directory
Views
User view
Parameters
directory: Specifies the directory to be deleted.
Usage guidelines
To delete a directory, first delete the files and subdirectories in the directory. To delete files, use the
delete command.
Examples
# Delete the mydir directory.
<boot> rmdir flash:/mydir
Remove directory flash:/mydir?[Y/N]:y
Directory flash:/1 removed.
Related commands
delete
dir
mkdir

shutdown

Use shutdown to shut down the management Ethernet interface.
Use undo shutdown to bring up the management Ethernet interface.
Syntax
shutdown
undo shutdown
Default
The management Ethernet interface is up.
Views
Management Ethernet interface view
Usage guidelines
When the management Ethernet interface is not operating correctly, you can shut it down and then
bring it up.
267
*
*
*