Login Management Commands; Activation-Key - HPE D6020 Maintenance And Service Manual

Login management commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
Some login management commands are available in both user line view and user line class view. For
these commands, the device uses the following rules to determine the settings to be activated:
•
A setting in user line view applies only to the user line. A setting in user line class view applies to
all user lines of the class.
•
A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line
class view.

activation-key

Use activation-key to set the terminal session activation key. Pressing this shortcut key starts a
terminal session.
Use undo activation-key to restore the default.
Syntax
activation-key key-string
undo activation-key
Default
The terminal session activation key is Enter.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
key-string: Specifies a shortcut key. It can be a character (case sensitive), or an ASCII code value in
the range of 0 to 127. For example, if you configure activation-key 1, the shortcut key is Ctrl+A. If
you configure activation-key a, the shortcut key is a. For information about ASCII code values of
individual characters, see the standard ASCII code chart. For information about ASCII code values
of combined keys that use the Ctrl key, see
Usage guidelines
This command is not supported in VTY line view or VTY line class view.
This command takes effect immediately.
To display the current terminal session activation key, use the display current-configuration |
include activation-key command.
Table 6 ASCII code values for combined keys that use the Ctrl key
Combined key
Ctrl+A
Table 6.
ASCII code value
1
48