System-View; Telnet; Tftp - HPE D6020 Maintenance And Service Manual

* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<Syaname.59>

system-view

Use system-view to enter system view from user view.
Syntax
system-view
Views
User view
Examples
# Enter system view from user view.
<boot> system-view
[boot]
Related commands
quit

telnet

Use telnet to log in to a Telnet server.
Syntax
telnet { server-ipv4-address | ipv6 server-ipv6-address }
Views
User view
Parameters
server-ipv4-address: Specifies the IPv4 address of the Telnet server in dotted decimal notation.
server-ipv6-address: Specifies the IPv6 address of the Telnet server.
Usage guidelines
If the Telnet server does not respond, you can press Ctrl+K to abort the login attempt and try again
later.
Examples
# Log in to the Telnet server 192.168.100.1.
<boot> telnet 192.168.100.1

tftp

Use tftp to access to a TFTP server.
Syntax
tftp server-ipv4-address { get remote-file local-file | put local-file remote-file }
tftp ipv6 server-ipv6-address { get remote-file local-file | put local-file remote-file }
269
*