Send - HPE D6020 Maintenance And Service Manual

The setting in user line view takes effect immediately for the current session. The setting in user line
class view takes effect for login sessions that are established after the setting is configured.
Examples
# Set the maximum number of lines to send at a time to 30 for console line 0.
<Sysname> system-view
[Sysname] line console 0
[Sysname-line-console0] screen-length 30
Related commands
screen-length disable

send

Use send to send messages to online login users.
Syntax
send { all | number1 | { aux | console | tty | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
all: Specifies all user lines.
number1: Specifies the absolute number of a user line.
The following matrix shows the value ranges for the number1 argument:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
aux: Specifies the AUX line.
The following matrix shows the aux keyword and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
Value range
0 to 144
0 to 144
0 to 144
0 to 225
0 to 225
0 to 417
0 to 2399
86
Keyword
compatibility
No
No
Yes
Yes