Idle-Timeout; Ip Alias - HPE D6020 Maintenance And Service Manual

idle-timeout

Use idle-timeout to set the CLI connection idle-timeout timer.
Use undo idle-timeout to restore the default.
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
Default
The CLI connection idle-timeout timer is 10 minutes.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
minutes: Specifies the number of minutes, in the range of 0 to 35791.
seconds: Specifies the number of seconds, in the range of 0 to 59. The default is 0 seconds.
Usage guidelines
The system automatically terminates a user connection if no information interaction occurs on the
connection within the idle-timeout interval.
To disable the idle-timeout feature, execute the idle-timeout 0 command.
The setting in user line view takes effect immediately for the current session. The setting in user line
class view takes effect for login sessions that are established after the setting is configured.
Examples
# Set the CLI connection idle-timeout timer to 1 minute and 30 seconds for console line 0.
<Sysname> system-view
[Sysname] line console 0
[Sysname-line-console0] idle-timeout 1 30

ip alias

Use ip alias to associate a Telnet redirect listening port with an IP address.
Use undo ip alias to restore the default.
Syntax
ip alias ip-address port-number
undo ip alias ip-address
Default
A Telnet redirect listening port is not associated with an IP address.
Views
System view
70