<Sysname> display system stable state
System state
Redundancy state: Not ready
Slot
CPU
1
0
* 2
0
# (Distributed devices in IRF mode.) Display system stability and status information.
<Sysname> display system stable state
System state
Redundancy state: Stable
Chassis
1
1
1
* 1
Table 51 Command output
Field
System state
Redundancy state
Role
State
*
Related commands
display device
display ha service-group (High Availability Command Reference)
display system internal process state (Device management probe commands)
: Not ready
Role
State
Active
Stable
Standby
HA batch backup
: Not ready
Slot
CPU
Role
1
0
Active
2
0
Standby
3
0
Other
3
1
Other
Description
System status:
•
Stable—The system is operating stably.
•
Not ready—The system is not operating stably. You cannot perform an ISSU
when the system is in this state.
System redundancy status:
•
Stable—Both MPUs are operating stably. You can perform a switchover.
•
No redundance—The system has only one MPU and the MPU is operating
stably. You cannot perform a switchover.
•
Not ready—The system is not operating stably. You cannot perform a switchover.
Role of the card in the system:
•
Active—The card is the active MPU.
•
Standby—The card is the standby MPU.
•
Other—The card is not an MPU.
Card status:
•
Stable—The card is operating stably.
•
Board inserted—The card has just been installed.
•
Kernel initiating—Card kernel is being initialized.
•
Service starting—Services are starting.
•
Service stopping—Services are stopping.
•
HA batch backup—An HA batch backup is going on.
•
Interface data batch backup—An interface data batch backup is in progress.
The object is not operating stably.
State
Stable
Stable
Stable
Kernel initiating
316