Super Authentication-Mode - HPE D6020 Maintenance And Service Manual

super authentication-mode

Use super authentication-mode to set an authentication mode for temporary user role
authorization.
Use undo super authentication-mode to restore the default.
Syntax
super authentication-mode { local | scheme } *
undo super authentication-mode
Default
Local password authentication applies.
Views
System view
Predefined user roles
network-admin
Parameters
local: Enables local password authentication.
scheme: Enables remote AAA authentication.
Usage guidelines
For local password authentication, use the super password command to set a password.
For remote AAA authentication, set the username and password on the RADIUS or HWTACACS
server.
If you specify both local and scheme keywords, the keyword first entered in the command takes
precedence.
•
scheme local—Enables remote-then-local authentication mode. The device first performs AAA
authentication to obtain a temporary user role. Local password authentication is performed if
the remote HWTACACS or RADIUS server does not respond, or if the AAA configuration on the
device is invalid.
•
local scheme—Enables local-then-remote authentication mode. The device first performs
local password authentication. If no password is configured for the user role, the device
performs remote authentication.
For more information about AAA, see Security Configuration Guide.
Examples
# Enable local-only authentication for temporary user role authorization.
<Sysname> system-view
[Sysname] super authentication-mode local
# Enable remote-then-local authentication for temporary user role authorization.
<Sysname> system-view
[Sysname] super authentication-mode scheme local
Related commands
authentication super (Security Command Reference)
super password
43