Security zone commands
display security-zone
Use display security-zone to display security zone information.
Syntax
display security-zone [ name zone-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name zone-name: Specifies the security zone name, a case-insensitive string of 1 to 31 characters.
If you do not specify this option, the command displays all security zones, including system-defined
and user-defined security zones.
Usage guidelines
When displaying all security zones, the command uses the following order:
1.
System-defined security zones.
2.
User-defined security zones in alphabetical order of security zone names.
Examples
# Display information about the security zone myZone.
<Sysname> display security-zone name myZone
Name: myZone
Members:
GigabitEthernet1/0/3
GigabitEthernet1/0/4
Table 36 Command output
Field
Name
Members
display zone-pair security
Use display zone-pair security to display all zone pairs.
Syntax
display zone-pair security
Description
Security zone name.
Members in the security zone:
•
Type and number of a Layer 3 interface.
•
None. If a security zone does not have any members, this field displays None.
272