Mount - HPE D6020 Maintenance And Service Manual

#
---- More ----

mount

Use mount to mount a file system.
Syntax
mount filesystem
Views
User view
Predefined user roles
network-admin
Parameters
filesystem: Specifies the name of a file system.
Usage guidelines
Generally, file systems on hot-swappable storage media are automatically mounted when the
storage media are connected to the device. If the system cannot recognize a file system, however,
you must mount the file system before you can access it.
To avoid file system corruption, do not perform the following tasks while the system is mounting a file
system:
•
Install or remove storage media.
•
Install or remove cards. (Distributed devices in standalone or IRF mode.)
•
Perform an active/standby switchover. (Distributed devices in standalone mode.)
•
Perform a switchover between the global active MPU and a global standby MPU. (Distributed
devices in IRF mode.)
•
Perform a master/subordinate switchover. (Centralized devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Mount the file system on the CF card.
<Sysname> mount cfa0:
# (Centralized devices in IRF mode.) Mount the file system on the CF card of the master.
<Sysname> mount cfa0:
# (Centralized devices in IRF mode.) Mount the file system on the CF card of a subordinate member.
<Sysname> mount slot2#cfa0:
# (Distributed devices in standalone mode.) Mount the file system on the CF card of the active MPU.
<Sysname> mount cfa0:
# (Distributed devices in standalone mode.) Mount the file system on the CF card of the standby
MPU (in slot 1).
<Sysname> mount slot1#cfa0:
# (Distributed devices in IRF mode.) Mount the file system on the CF card of the global active MPU.
<Sysname> mount cfa0:
# (Distributed devices in IRF mode.) Mount the file system on the CF card of a global standby MPU.
<Sysname> mount chassis2#slot1#cfa0:
167