HPE D6020 Maintenance And Service Manual page 201

(Distributed devices in IRF mode.) The global standby MPUs always use the same current startup
configuration file as the global active MPU. After an active/standby switchover, it is normal that the
current startup configuration files on all MPUs are displayed as NULL. This is because the new
global active MPU continues to run with the running configuration rather than rebooting with a startup
configuration file.
(Centralized devices in IRF mode.) All IRF members use the same current startup configuration file
as the master. After a master/subordinate switchover, it is normal that the current startup
configuration files on all IRF members are displayed as NULL. This is because the new master
continues to run with the running configuration rather than rebooting with a startup configuration file.
Examples
# (Centralized devices in standalone mode.) Display names of the startup configuration files.
<Sysname> display startup
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 22 Command output
Field
Current startup saved-configuration file
Next main startup saved-configuration file
Next backup startup saved-configuration file
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display names of the
startup configuration files.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Slot 1:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 23 Command output
Field
MainBoard
Current startup saved-configuration file
Next main startup saved-configuration file
Next backup startup saved-configuration file
Description
Configuration file that the device has started up with.
Primary configuration file to be used at the next startup.
Backup configuration file to be used at the next startup.
Description
(Distributed devices in standalone mode.) Displays the
startup configuration files on the active MPU.
(Centralized devices in IRF mode.) Displays the startup
configuration files on the master device.
(Distributed devices in standalone mode.) Configuration file
that the active MPU has started up with.
(Centralized devices in IRF mode.) Configuration file that the
device has started up with.
Primary startup configuration file to be used at the next
startup.
Backup startup configuration file to be used at the next
startup.
193