Feature - HPE D6020 Maintenance And Service Manual

Feature: lisp
Feature: bgp
Feature: l3vpn
Feature: route-policy
Feature: mt
Feature: multicast
Feature: pim
Feature: igmp
Feature: mld
Feature: mcast-domain
Feature: msdp
Feature: mip
Related commands

feature

role feature-group
feature
Use feature to add a feature to a feature group.
Use undo feature to remove a feature from a feature group.
Syntax
feature feature-name
undo feature feature-name
Default
A user-defined feature group does not have any feature.
Views
Feature group view
Predefined user roles
network-admin
Parameters
feature-name: Specifies a feature name. You must enter the feature name in lower case.
Usage guidelines
Repeat the feature command to add multiple features to a feature group.
Examples
# Add the security features AAA and ACL to security group security-features.
<Sysname> system-view
[Sysname] role feature-group name security-features
[Sysname-featuregrp-security-features] feature aaa
[Sysname-featuregrp-security-features] feature acl
Related commands
display role feature
display role feature-group
(LISP protocol related commands)
(Border Gateway Protocol related commands)
(Layer 3 Virtual Private Network related commands)
(Routing Policy related commands)
(Multiple-topology related commands)
(Multicast related commands)
(Protocol Independent Multicast related commands)
(Internet Group Management Protocol related commands)
(Multicast Listener Discovery related commands)
(Multicast Domain related commands)
(Multicast Source Discovery Protocol related commands)
(Moblie IP related commands)
27