Auto-Copy Destination-Directory - HPE D6020 Maintenance And Service Manual

•
Use the absolute path to specify a file or directory. For example, use the dir flash:/ command to
display the files and directories in the flash: file system.
•
Use the cd command to change the working directory to the root directory of the file system
before accessing a file or directory in the file system. For example, to display the files and
directories in the root directory of the flash: file system, perform the following tasks:
a. Use the cd flash:/ command to change the working directory to the root directory of the file
system.
b. Execute the dir command.
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.

auto-copy destination-directory

Use auto-copy destination-directory to specify the destination directory for the automatic copying
feature.
Use undo auto-copy destination-directory to restore the default.
Syntax
auto-copy destination-directory destination-directory
undo auto-copy destination-directory
Default
No destination directory is specified for the automatic copying feature.
Views
System view
Predefined user roles
network-admin
Parameters
destination-directory: Specifies the destination directory for the automatic copying feature. This
directory must reside in a file system on the device.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
The automatic copying feature automatically copies files from a hot-swappable storage medium to
the device when you connect the storage medium to the device. For this feature to operate correctly,
Command compatibility
Yes
Yes
No
No
No
No
No
150