Stopbit-Error Intolerance; Stopbits - HPE D6020 Maintenance And Service Manual

[Sysname] line aux 0
[Sysname-line-aux0] speed 19200

stopbit-error intolerance

Use stopbit-error intolerance to enable stop bit setting consistency detection.
Use undo stopbit-error intolerance to disable stop bit setting consistency detection.
Syntax
stopbit-error intolerance
undo stopbit-error intolerance
Default
Stop bit setting consistency detection is disabled.
Views
User line view
Predefined user roles
network-admin
Usage guidelines
This command is not supported in VTY line view.
When stop bit setting consistency detection is enabled, the device discards packets on the line if the
terminal is using a different stop bit setting than the line.
Examples
# Enable stop bit setting consistency detection for AUX line 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] stopbit-error intolerance

stopbits

Use stopbits to specify the number of stop bits for a character.
Use undo stopbits to restore the default.
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
Default
One stop bit is used.
Views
User line view
Predefined user roles
network-admin
Parameters
1: Uses one stop bit.
91