Ftp Commands; Ftp Server Commands; Display Ftp-Server - HPE D6020 Maintenance And Service Manual

FTP commands

Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
FTP is not supported in FIPS mode.

FTP server commands

display ftp-server

Use display ftp-server to display FTP server configuration and status information.
Syntax
display ftp-server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display FTP server configuration and status information.
<Sysname> display ftp-server
FTP server is running.
User count:
Idle-timeout timer (in minutes):
Table 12 Command output
Field
User count
Idle-timeout timer (in minutes)
Related commands
ftp server enable
1
30
Description
Number of the current logged-in users.
If no packet is exchanged between the FTP server and client during
this period, the FTP connection is closed.
107