HPE D6020 Maintenance And Service Manual page 189

Use undo archive configuration location to restore the default.
Syntax
archive configuration location directory filename-prefix filename-prefix
undo archive configuration location
Default
No configuration archive directory or configuration archive file name prefix is set.
Views
System view
Predefined user roles
network-admin
Parameters
directory: Specifies the name of a configuration archive directory, a case-insensitive string of 1 to 63
characters. The value for this argument must take the format storage-medium-name:/folder-name.
The directory must already exist on the active MPU. (Distributed devices in standalone mode.)
directory: Specifies the name of a configuration archive directory, a case-insensitive string of 1 to 63
characters. The value for this argument must take the format storage-medium-name:/folder-name.
The directory must already exist on the global active MPU. (Distributed devices in IRF mode.)
directory: Specifies the name of a configuration archive directory, a case-insensitive string of 1 to 63
characters. The value for this argument must take the format storage-medium-name:/folder-name.
The directory must already exist on the master. (Centralized devices in IRF mode.)
directory: Specifies the name of a configuration archive directory, a case-insensitive string of 1 to 63
characters. The value for this argument must take the format storage-medium-name:/folder-name.
The directory must already exist on the device. (Centralized devices in standalone mode.)
filename-prefix: Specifies a file name prefix for configuration archives, a case-insensitive string of 1
to 30 characters. Valid characters are letters, digits, underscores (_), and hyphens (-).
Usage guidelines
Before archiving the running configuration, either manually or automatically, you must set a directory
and file name prefix for configuration archives. When you create the configuration archive directory,
follow these restrictions and guidelines:
•
(Distributed devices in standalone or IRF mode.) In standalone mode, the configuration archive
feature saves the running configuration only on the active MPU. In IRF mode, the feature saves
the running configuration only on the global active MPU. To make sure the system can archive
running configuration after an active/standby or master/subordinate switchover, create the
configuration archive directory on all MPUs.
•
(Centralized devices in IRF mode.) In an IRF fabric, the configuration archive feature saves the
running configuration only on the master device. To make sure the system can archive the
running configuration after a master/subordinate switchover, create the directory on all IRF
members.
Configuration archives take the file name format prefix_serial number.cfg, for example,
20080620archive_1.cfg and 20080620archive_2.cfg. The serial number is automatically assigned
from 1 to 1000, increasing by 1. After the serial number reaches 1000, it restarts from 1.
After you change the file directory or file name prefix, or reboot the device, all of the following events
occur:
•
The old configuration archives are regarded as common configuration files.
•
The configuration archive counter is reset.
•
The display archive configuration command no longer displays the old configuration
archives.
181