Configuration File Management Commands; Archive Configuration - HPE D6020 Maintenance And Service Manual

Configuration file management
commands
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.

archive configuration

Use archive configuration to manually archive the running configuration to the configuration
archive directory.
Syntax
archive configuration
Views
User view
Predefined user roles
network-admin
Usage guidelines
Before manually archiving the running configuration, you must use the archive configuration
location command to specify a directory and a name prefix for the configuration archives.
Configuration archive facilitates configuration rollback. It provides manual and automatic methods
for saving the running configuration as checkpoint references. For more information about the
archiving mechanism, see the section about configuration rollback in Fundamentals Configuration
Guide.
Examples
# Archive the running configuration.
<Sysname> archive configuration
Save the running configuration to an archive file. Continue? [Y/N]: Y
The archive configuration file myarchive_1.cfg is saved.
Related commands
archive configuration interval
archive configuration location
archive configuration max
display archive configuration
179