Auto-Copy Source-Directory - HPE D6020 Maintenance And Service Manual

you must specify a source directory and a destination directory for the copy operation. All files in the
source directory will be copied to the destination directory.
Examples
# Specify the root directory of the flash: file system as the destination directory for automatic copying.
<Sysname> system-view
[Sysname] auto-copy destination-directory flash:

auto-copy source-directory

Use auto-copy source-directory to specify the source directory for the automatic copying feature.
Use undo auto-copy source-directory to restore the default.
Syntax
auto-copy source-directory source-directory
undo auto-copy source-directory
Default
No source directory is specified for the automatic copying feature.
Views
System view
Predefined user roles
network-admin
Parameters
source-directory: Specifies the source directory for the automatic copying feature. This directory
must reside on a hot-swappable storage medium.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
The automatic copying feature automatically copies files from a hot-swappable storage medium to
the device when you connect the storage medium to the device. For this feature to operate correctly,
you must specify a source directory and a destination directory for the copy operation. All files in the
source directory will be copied to the destination directory.
Examples
# Specify the root directory of usba0: as the source directory for automatic copying.
<Sysname> system-view
[Sysname] auto-copy source-directory usba0:
Command compatibility
Yes
Yes
No
No
No
No
No
151