Rhelp - HPE D6020 Maintenance And Service Manual

Predefined user roles
network-admin
Parameters
marker: Specifies the retransmission offset, in bytes.
Usage guidelines
The file retransmission starts from the (offset+1)th byte.
You can perform this operation only after you log in to the FTP server.
Support for this command depends on the FTP server.
Examples
# Set retransmission offset to 2 bytes and retransmit the file h.c. The file has 82 bytes in total.
ftp> restart 2
restarting at 2. execute get, put or append to initiate transfer
ftp> put h.c h.c
local: h.c remote: h.c
350 Restart position accepted (2).
150 Ok to send data.
226 File receive OK.
80 bytes sent in 0.000445 seconds (175.6 kbyte/s)
ftp> dir
150 Here comes the directory listing.
-rw-r--r--

rhelp

Use rhelp to display the FTP commands supported by the FTP server.
Use rhelp protocol-command to display the help information for an FTP command supported by the
FTP server.
Syntax
rhelp [ protocol-command ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
protocol-command: Specifies an FTP command.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Display the FTP-related commands supported by the FTP server.
ftp> rhelp
214-The following FTP commands are recognized
USER PASS NOOP QUIT SYST TYPE
HELP CWD
1 0 0
XCWD PWD CDUP XCUP
80 Jul 18 02:58 h.c
135