Tftp Client Ipv6 Source - HPE D6020 Maintenance And Service Manual

•
ip source-ip-address: Specifies an IPv4 address. For successful TFTP packet transmission,
make sure this address is the IPv4 address of an interface in up state on the device.
Usage guidelines
The source address specified with the tftp command takes precedence over the source address
specified with the tftp client source command.
The source address specified with the tftp client source command applies to all TFTP connections.
The source address specified with the tftp command applies only to the current TFTP connection.
Examples
# Download the new.bin file from the TFTP server at 192.168.1.1 and save it as new.bin.
<Sysname> tftp 192.168.1.1 get new.bin
Press CTRL+C to abort.
% Total
100 13.9M
Writing file...Done.
<System>
Table 18 Command output
Field
%
Total
%
Received
%
Xferd
Average Dload
Speed Upload
Writing file...
Related commands
tftp client source

tftp client ipv6 source

Use tftp client ipv6 source to specify the source IPv6 address for TFTP packets sent to an IPv6
TFTP server.
Use undo tftp client ipv6 source to restore the default.
Syntax
tftp client ipv6 source { interface interface-type interface-number | ipv6 source-ipv6-address }
undo tftp client ipv6 source
% Received % Xferd
100 13.9M 0
Average Speed
Dload Upload
0 1206k 0 0:00:11
Description
Percentage of file transmission progress.
Size of files to be transmitted, in bytes.
Percentage of received file size to total file size.
Received file size, in bytes.
Percentage of sent file size to total file size.
Sent file size, in bytes.
Average download speed, in bps.
Average upload speed, in bps.
The system was writing the downloaded file to the storage medium.
This field is displayed only when the get or sget keyword is specified.
If the operation succeeded, this command displays Done at the end
of this field. If the operation failed, this command displays Failed.
144
Time Time Time
Total Spent Left
0:00:11 --:--:-- 1206k
Current
Speed