HPE D6020 Maintenance And Service Manual page 215

If you specify an .ipe file, the command sets all images as startup software images except

for the image that does not have a license.
For more information about licensing, see Fundamentals Configuration Guide.
If the upgrade images are not stored on the hardware in the slot you specified to upgrade, the system
automatically copies the images to that hardware. The destination directory is the root directory of
the storage medium on the hardware. If the destination root directory already contains a startup
image with the same name as an upgrade image, you must choose whether to overwrite the image.
The boot-loader file command overwrites the entire startup image list. To add new startup feature
images, specify all feature image files, including feature image files in the old startup image list. The
new startup image list will contain only the feature image files that are specified in the command.
Examples
# (Centralized devices in standalone mode.) Specify flash:/all.ipe as the main startup image file.
<Sysname> boot-loader file flash:/all.ipe main
Verifying the IPE file and the images............Done.
xx Router images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to the device.
File flash:/boot.bin already exists on the device.
File flash:/system.bin already exists on the device.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to flash:/boot.bin........................Done.
Decompressing file system.bin to flash:/system.bin...............................Done.
The images that have passed all examinations will be used as the main startup software
images at the next reboot on the device.
# (Centralized devices in standalone mode.) Specify flash:/boot.bin and flash:/system.bin as the
main startup boot and system image files.
<Sysname> boot-loader file boot flash:/boot.bin system flash:/system.bin main
This command will set the main startup software images. Continue? [Y/N]:y
Verifying the file flash:/boot.bin on the device...Done.
Verifying the file flash:/system.bin on the device........Done.
The images that have passed all examinations will be used as the main startup software
images at the next reboot on the device.
# (Distributed devices in standalone mode.) Specify flash:/all.ipe as the main startup image file for
the MPU in slot 0.
<Sysname> boot-loader file flash:/all.ipe slot 0 main
Verifying the IPE file and the images............Done.
xx Router images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to slot 0.
File flash:/boot.bin already exists on slot 0.
File flash:/system.bin already exists on slot 0.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to flash:/boot.bin........................Done.
Decompressing file system.bin to flash:/system.bin...............................Done.
207