Scheduler Schedule - HPE D6020 Maintenance And Service Manual

Default
No reboot delay time is specified.
Views
User view
Predefined user roles
network-admin
Parameters
time: Specifies the reboot delay time in the hh:mm or mm format. This argument can contain up to six
characters. When in the hh:mm format, mm must be in the range of 0 to 59.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
For data security, the system does not reboot at the reboot time if a file operation is being performed.
The device supports only one device reboot schedule. If you execute both the scheduler reboot
delay and schedule reboot at commands or execute one of the commands multiple times, the most
recent configuration takes effect.
Examples
# Configure the device to reboot after 88 minutes. This example assumes that the current time is
11:48 a.m. on June 6, 2016.
<Sysname> scheduler reboot delay 88
Reboot system at 13:16 06/06/2016(in 1 hours and 28 minutes). Confirm? [Y/N]:

scheduler schedule

Use scheduler schedule to create a schedule and enter its view, or enter the view of an existing
schedule.
Use undo scheduler schedule to delete a schedule.
Syntax
scheduler schedule schedule-name
undo scheduler schedule schedule-name
Default
No schedule exists.
Views
System view
Predefined user roles
network-admin
Parameters
schedule-name: Specifies the schedule name, a case-sensitive string of 1 to 47 characters.
Usage guidelines
You can configure a schedule to have the device automatically run a command or a set of commands
without administrative interference.
344