Display Cpu-Usage History - HPE D6020 Maintenance And Service Manual

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays the CPU usage monitoring settings for the master device.
(Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
the CPU usage monitoring settings for the global active MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Examples
# Display the CPU usage monitoring settings.
<Sysname> display cpu-usage configuration
CPU usage monitor is enabled.
Current monitor interval is 60 seconds.
Current monitor threshold is 90%.
Related commands
monitor cpu-usage enable
monitor cpu-usage interval
monitor cpu-usage threshold

display cpu-usage history

Use display cpu-usage history to display the historical CPU usage statistics in a coordinate
system.
Syntax
Centralized devices in standalone mode:
display cpu-usage history [ job job-id ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display cpu-usage history [ job job-id ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display cpu-usage history [ job job-id ] [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
job job-id: Specifies a process by its ID. If you do not specify a process, this command displays the
statistics for the entire system's CPU usage (the total CPU usage of all processes). To view the IDs
and names of the running processes, use the display process command. For more information, see
Network Management and Monitoring Configuration Guide.
slot slot-number: Specifies a card by its slot number. If you specify a process but do not specify a
card, this command displays the statistics for the process on the active MPU. If you do not specify
291