Line - HPE D6020 Maintenance And Service Manual

Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address to be associated with the Telnet redirect listening port. The IP
address cannot be the address of an interface on the device, but can belong to the same subnet.
port-number: Specifies a Telnet redirect listening port number in the range of 2000 to 50000.
Usage guidelines
For a user to Telnet to a device through a Telnet redirect server, associate a Telnet redirect listening
port with an IP address of the redirect server. Then, the user only needs to specify the IP address for
the telnet command to Telnet to the destination device. If you do not configure the association, the
user must specify both the IP address and the Telnet redirect listening port number.
Examples
# Associate the Telnet redirect listening port 2000 with the IP address 1.1.1.1.
<Sysname> system-view
[Sysname] ip alias 1.1.1.1 2000
Related commands
display tcp (Layer 3—IP Services Command Reference)
redirect enable
redirect listen-port

line

Use line to enter one or multiple user line views.
Syntax
line { first-number1 [ last-number1 ] | { aux | console | tty | vty } first-number2 [ last-number2 ] }
Views
System view
Predefined user roles
network-admin
Parameters
first-number1: Specifies the absolute number of the first user line.
The following matrix shows the value ranges for the first-number1 argument:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
Value range
0 to 144
0 to 144
0 to 144
0 to 225
0 to 225
0 to 417
0 to 2399
71