Rmdir; Rsync - HPE D6020 Maintenance And Service Manual

Clear flash:/a.cfg? [Y/N]:y
Clearing file flash:/a.cfg... Done.
Clear flash:/b.cfg? [Y/N]:y
Clearing file flash:/b.cfg... Done.
# Delete the b.cfg file from the recycle bin. (In this example there are two files in the recycle bin.)
<Sysname> reset recycle-bin
Clear flash:/a.cfg? [Y/N]:n
Clear flash:/b.cfg? [Y/N]:y
Clearing file flash:/b.cfg... Done.
Related commands
delete

rmdir

Use rmdir to delete a directory.
Syntax
rmdir directory
Views
User view
Predefined user roles
network-admin
Parameters
directory: Specifies a directory.
Usage guidelines
To delete a directory, you must delete all files and subdirectories in the directory permanently or
move them to the recycle bin. If you move them to the recycle bin, executing the rmdir command
permanently deletes them.
Examples
# Delete the subtest directory.
<Sysname>rmdir subtest/
Remove directory flash:/test/subtest and the files in the recycle-bin under this directory
will be deleted permanently. Continue? [Y/N]:y
Removing directory flash:/test/subtest... Done.

rsync

Use rsync to synchronize files and directories from an Rsync server.
Syntax
rsync [ -s source-ip ] rsync-server { source-file | source-directory } dest-directory [ user-name
password ]
Views
User view
170