Display Boot-Loader - HPE D6020 Maintenance And Service Manual

subslot subslot-number-list: Specifies a list of up to seven subslot number items. Each item
specifies a subcard by its subslot number or a range of subcards in the form of start-subslot-number
to end-subslot-number. If you do not specify a subcard, this command loads the Boot ROM image
for the base card.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
Boot ROM images are contained in the .bin Comware boot image file. You can specify a Comware
boot image file in this command to upgrade the Boot ROMs in the system before you upgrade the
Comware images. If you do not upgrade Boot ROMs before upgrading Comware images, the system
automatically upgrades Boot ROMs as necessary when loading Comware images.
The new Boot ROM images take effect after you reboot the device.
Examples
# Use the file a.bin in the root directory of the flash memory to upgrade the Boot ROM image.
<Sysname> bootrom update file flash:/a.bin
This command will update the Boot ROM file on the specified board(s), Continue? [Y/N]:y
Now updating the Boot ROM, please wait...
.............Done.
Related commands
boot-loader file

display boot-loader

Use display boot-loader to display current software images and startup software images.
Syntax
Centralized devices in standalone mode:
display boot-loader
Distributed devices in standalone mode/centralized devices in IRF mode:
display boot-loader [ slot slot-number ]
Distributed devices in IRF mode:
display boot-loader [ chassis chassis-number [ slot slot-number ] ]
Views
Any view
212
Command compatibility
No
No
Yes
Yes
Yes
Yes
Yes