Device Management Commands; Card-Mode - HPE D6020 Maintenance And Service Manual

Device management commands

Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.

card-mode

Use card-mode to set the operating mode for an interface card.
Syntax
Centralized devices in standalone mode:
card-mode slot slot-number mode-name
Distributed devices in standalone mode/centralized devices in IRF mode:
card-mode slot slot-number subslot subslot-number mode-name
Distributed devices in IRF mode:
card-mode chassis chassis-number slot slot-number subslot subslot-number mode-name
Views
System view
Predefined user roles
network-admin
Parameters
chassis chassis-number: Specifies an IRF member device by its member ID. (Distributed devices in
IRF mode.)
slot slot-number: Specifies a subcard by its slot number. (Centralized devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. (Centralized devices in IRF
mode.)
slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone or IRF
mode.)
subslot subslot-number: Specifies a subcard by its subslot number.
mode-name: Specifies an operating mode. The following shows all operating mode values:
•
atm: Specifies the ATM mode. All interfaces on the interface card act as ATM interfaces.
•
auto: Specifies the auto negotiation mode. The interface card operates in ATM or EFM mode,
depending on the negotiation result.
•
e: Specifies the E mode. All interfaces on the interface card act as CPOS E3-E1 interfaces.
•
e1: Specifies the E1 mode. All interfaces on the interface card act as CPOS E1 interfaces.
•
e3: Specifies the E3 mode. All interfaces on the interface card act as CPOS E3 interfaces.
277