Lock-Key - HPE D6020 Maintenance And Service Manual

Predefined user roles
network-admin
Usage guidelines
This command is not supported in FIPS mode.
This command locks the current user line to prevent unauthorized users from using the line. You
must set the password for unlocking the line as prompted. The user line is locked after you enter the
password and confirm the password.
To unlock the user line, press Enter and enter the password you set.
Examples
# Lock the current user line and set the password for unlocking the line.
<Sysname> lock
Please input password<1 to 16> to lock current line:
Password:
Again:
// The user line is locked. To unlock it, press Enter and enter the password:
Password:
<Sysname>

lock-key

Use lock-key to set the user line locking key. Pressing this shortcut key locks the current user line
and enables unlocking authentication.
Use undo lock-key to restore the default.
Syntax
lock-key key-string
undo lock-key
Default
No user line locking key is set.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
key-string: Specifies a shortcut key. It can be a character (case sensitive), or an ASCII code value in
the range of 0 to 127. For example, if you configure lock-key 1, the shortcut key is Ctrl+A. If you
configure lock-key a, the shortcut key is a. For information about ASCII code values of individual
characters, see the standard ASCII code chart. For information about ASCII code values of
combined keys that use the Ctrl key, see
locked !
Table 6.
77