Set Authentication Password - HPE D6020 Maintenance And Service Manual

Hardware
Usage guidelines
You can use this command to send notifications to online users before performing an operation that
might affect other online users, for example, before rebooting the device.
To end a message, press Enter. To abort the send operation, press Ctrl+C.
Examples
# Send a notification to the user on VTY 1.
<Sysname> send vty 1
Input message, end with Enter; abort with CTRL+C:
Your attention, please. I will reboot the system in 3 minutes.
Send message? [Y/N]:y
The message should appear on the user's terminal screen as follows:
[Sysname]
***
***
***Message from vty0 to vty1
***
Your attention, please. I will reboot the system in 3 minutes.

set authentication password

Use set authentication password to set the password for local password authentication.
Use undo set authentication password to restore the default.
Syntax
set authentication password { hash | simple } string
undo set authentication password
Default
No password is set for local password authentication.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
hash: Specifies a password in hashed form.
simple: Sets a password in plaintext form. For security purposes, the password specified in plaintext
form will be stored in hashed form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 16 characters. Its
hashed form is a case-sensitive string of 1 to 110 characters.
Value ranges
•
•
88
tty–1 to 2304
vty–0 to 63