HPE D6020 Maintenance And Service Manual page 231

Usage guidelines
Backup startup images are used only when the main boot or system image is missing or corrupt. For
more information, see Fundamental Configuration Guide.
To modify the backup startup image list, you must use the boot-loader file command.
Examples
# (Centralized devices in standalone mode.) Display the backup startup software images.
<Sysname> display install backup
Backup startup software images on the device:
flash:/boot-a0201.bin
flash:/system-a0201.bin
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display the backup
startup software images.
<Sysname> display install backup
Backup startup software images on slot 1:
flash:/boot-a0201.bin
flash:/system-a0201.bin
# (Distributed devices in IRF mode.) Display the backup startup software images.
<Sysname> display install backup
Backup startup software images on chassis 1 slot 1:
flash:/boot-a0201.bin
flash:/system-a0201.bin
# Display detailed information about backup startup software images.
<Sysname> display install backup verbose
Backup startup software images on slot 1:
flash:/boot-a0201.bin
[Package]
Vendor: HPE
Product: xxxx
Service name: boot
Platform version: 7.1
Product version: Beta 1330
Supported board: mpu
[Component]
Component: boot
Description: boot package
flash:/system-a0201.bin
[Package]
Vendor: HPE
Product: xxxx
Service name: system
Platform version: 7.1
Product version: Beta 1330
Supported board: mr, lc, sfc
[Component]
Component: system
Description: system package
223