Fields
display telnet client
Use display telnet client to display the packet source setting for the Telnet client.
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the packet source setting for the Telnet client.
<Sysname> display telnet client
The source IP address is 1.1.1.1.
Related commands
telnet client source
display user-interface
Use display user-interface to display user line information.
Syntax
display user-interface [ number1 | { aux | console | tty | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user line.
The following matrix shows the value ranges for the number1 argument:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
Description
For example, if "2:UXXX X" is displayed, there are five user lines of the user line
class, which use the absolute numbers 2 through 6. User line 2 is in use, and the
other user lines are not.
58
Value range
0 to 144
0 to 144
0 to 144
0 to 225